Resin · Guide
A Beginner Buying Guide for Epoxy Resin
What to read on a beginner epoxy label: mix ratio, pour depth, kit size, and the few tools that matter.
The useful epoxy purchase is the one whose label matches the object you are making. Brand reputation is a starting search, not a finish line. This guide is the label reading, the kit size, and the short tool list. It is not a ranked shootout. Castwick has not scored these resins in a lab.
Decide the project before the brand
A 4-inch coaster, a shallow tray, a thin coat over a photograph, and a 1-inch embedding mold are four different depths. Coating and “art” epoxies are made to go on in a film or a shallow pour. Casting epoxies are made to go deeper, and they usually cure more slowly and with less heat. Pour a coating resin past its depth and the mass can overheat, amber, crack, or stay soft in the middle.
Write the project down before you open Amazon: object, thickness, and whether anything is embedded. Then you are shopping for a depth rating, not for a mood.
Four lines on the label
Mix ratio. 1:1 by volume is the friendliest beginner instruction, because graduated cups are enough. A 2:1 or a weight ratio is fine if you will actually measure it. A scale is not optional when the label says grams.
Volume or weight. The words sit next to the ratio. Cups and grams are not interchangeable. If you mix a weight ratio in a cup marked in ounces, you are guessing.
Maximum pour depth. It may say 1/8 inch, 1/4 inch, or a larger number on a casting formula. If you cannot find a depth anywhere on the listing or the maker’s sheet, pick another product. You cannot use an unknown limit.
Demold time and full cure. Demold is when the piece can leave the mold. Full cure is when it has finished hardening. They are hours or days apart. A piece that survives demolding can still fingerprint, cloud, or sag if you stack it or set a hot mug on it that afternoon.
Coating resin and casting resin
Use a coating or art epoxy for coasters around 1/8 inch, for trays inside the stated depth, and for a flood coat. Names you will actually see in search results include ArtResin, TotalBoat table top epoxy, and Pro Marine table top epoxy. They are not the same formula. Compare each one’s current depth rating with your mold. Table-top epoxy is still a coating family even when the can is large.
Use a casting resin when the mold is thicker than those coatings allow. Alumilite Amazing Clear Cast and EasyCast are two long-sold casting epoxies. They are often 1:1 by volume, and they are slower. Read the can you receive. A “clear cast” in the title of an unknown listing is not the same product.
None of these is a winner we tested. The right can is the one you can measure accurately, in a size you will use before it turns, at a depth your mold does not exceed.
How much to buy
Start with a small kit, about 8 to 16 ounces total, or whatever covers one test pour plus a set of four coasters. Epoxy has a shelf life. Once the bottles are open, moisture and air work on them. A gallon looks thrifty until month eight, when part A is amber and part B has crystallized or thickened.
Store bottles closed, upright, and out of the sun. A cool cupboard beats a garage that swings from 40°F to 100°F. If part A already looks like tea, a clear project will look like tea.
Tools that matter more than another brand
- Graduated mixing cups. Mix in one cup, scrape, and mix again in a second cup. The second cup catches the unmixed ring at the bottom.
- Flat stir sticks. A round stick is worse at scraping the wall of the cup.
- Nitrile gloves, not a single pair. You will change them.
- A level. Resin finds the low side of the table and stays there.
- A timer. The working time starts when the two parts meet.
- A plastic sheet or a silicone mat you will not use for food.
- A box or bin to rest over the pour so dust has a longer trip.
- Silicone molds meant for resin. Do not promote a food mold into the resin drawer and then back to the kitchen.
A heat gun is useful later for surface bubbles. It is not required to learn the mix. A kitchen torch is faster and much easier to scorch. Leave both until the bubble guide makes sense.
A scale is required for weight ratios and is a good check even for volume mixes. A pressure pot is a later tool for people who cast a lot of small clear pieces. It is a pressurized vessel. It is not a first-Saturday purchase, and it is not something to improvise from a random paint tank.
What to skip on the first order
Skip the 48-color mica vault, the “food grade resin” claim that links to no technical sheet, and any promise that a craft epoxy is safe for cutting boards or cup interiors. Food-contact ratings are specific, documented, and uncommon in this aisle. Tumbler supplies explains the exterior-only version of that problem.
Skip a kit whose only instructions are a 20-second video with no ratio on screen.
Names worth searching, without a ranking
Coating epoxy
ArtResin 1:1 epoxy
A common 1:1 art and coating epoxy, sold for shallow pours and marketed with UV stabilizers. Confirm the pour depth on the current label before you use it for anything thicker than a coaster or a thin coat.
Price: check Amazon. It changes with size, seller, and coupons. Castwick does not store a live price, star rating, or review count.
Amazon search: ArtResin epoxy resin 1 to 1 kit
View current listings on Amazon (opens in a new tab)Affiliate link. A qualifying purchase may earn Castwick a commission.
Coating epoxy
Table-top epoxy
TotalBoat and Pro Marine both sell widely available table-top epoxies. Search one, read the depth and the mix ratio, and compare it with your tray. A larger can is only a better buy if you will use it.
Price: check Amazon. It changes with size, seller, and coupons. Castwick does not store a live price, star rating, or review count.
Amazon search: TotalBoat table top epoxy resin
View current listings on Amazon (opens in a new tab)Affiliate link. A qualifying purchase may earn Castwick a commission.
Casting epoxy
Casting epoxy for thicker molds
Amazing Clear Cast is a long-sold casting epoxy people use when a coating resin's depth limit is too shallow. EasyCast is another name you will see. Check the demold time. Casting formulas are usually slower.
Price: check Amazon. It changes with size, seller, and coupons. Castwick does not store a live price, star rating, or review count.
Amazon search: Alumilite Amazing Clear Cast epoxy
View current listings on Amazon (opens in a new tab)Affiliate link. A qualifying purchase may earn Castwick a commission.
Tool
Graduated mixing cups
Marked cups are the difference between a ratio and a guess. Buy cups you can read in ounces or milliliters, and plan to use two per pour.
Price: check Amazon. It changes with size, seller, and coupons. Castwick does not store a live price, star rating, or review count.
Amazon search: graduated resin mixing cups
View current listings on Amazon (opens in a new tab)Affiliate link. A qualifying purchase may earn Castwick a commission.
Safety
Nitrile gloves
Keep a box, not a pair. Change them when they tear or when you have touched wet resin and then need to touch a phone, a doorknob, or your face.
Price: check Amazon. It changes with size, seller, and coupons. Castwick does not store a live price, star rating, or review count.
Amazon search: disposable nitrile gloves box
View current listings on Amazon (opens in a new tab)Affiliate link. A qualifying purchase may earn Castwick a commission.
Mold
Silicone coaster molds
A simple square or circle, about 4 inches, is enough for a first set. Avoid unmarked food molds you still want to bake with.
Price: check Amazon. It changes with size, seller, and coupons. Castwick does not store a live price, star rating, or review count.
Amazon search: silicone resin coaster molds 4 inch
View current listings on Amazon (opens in a new tab)Affiliate link. A qualifying purchase may earn Castwick a commission.
The test pour
Before a set of eight, mix one small batch with nothing in it. Time the stir. Pour a single mold or a silicone cup. Cover it. Wait the full demold time. If it is hard and dry to a gloved finger, you can repeat the same ratio with paper or mica. If it is tacky, the ratio, the temperature, or the mixing was off. Do not “fix” a tacky test by pouring a larger one.
Write the brand, the ratio, the room temperature if you know it, and the result on a card. That card is worth more than a second set of pigments. When you are ready for the project itself, the coaster guide uses this same order.